Latex Bonding Adhesive

$0.00


Available in 1 gallon cans or 5 gallon pails

Latex Bonding Adhesive Product Information:

Seal Trust™ Latex Bonding Adhesive is a white water based adhesive used in adhering EPDM or TPO membranes to various substrates. Product goes on white and dries by evaporation to a clear film.

Application Instructions:

Each gallon covers approximately 100 square feet ONLY. Apply enough adhesive to roof substrate so that membrane will be coated by adhesive when rolled into it. MEMBRANE MUST BE LAID INTO WET ADHESIVE. Wrinkles may be brushed out while adhesive is still wet. ON HOT DAYS, THE ADHESIVE MAY DRY TOO FAST TO USE THIS PROCEDURE. If so apply a thin coat of adhesive to the roof surface and the back of the membrane. For highest initial bond strength join after film becomes tacky. Initial tests indicate that adhesives may be used at temperatures as low as 40F. DO NOT ALLOW MATERIAL TO FREEZE. Meets OTC VOC requirements.

SKU: https://sealtrustroofing.com/wp-content/uploads/2018/08/tpo-seam-tape.png Category:

Description

Physical Properties:

Color: Milky, white liquid when wet. Clear when dry.
Viscosity (eps): Brookfield RVF #3 spindle @ 20 rpm=
PH: 7-8 3000-4000 cps
Density (#/GAL.): 8.7# ± .3 %
Solids: 50% ± 2%
Flash Point (F): N?A
Base: Synthetic latex polymers
Solvent System: Water Clean-up Solvent: Water if cleaned immediately; scrape if dry.

Storage: MINIMIZE CONTACT WITH ATMOSPHERIC AIR TO PREVENT INNOCULATION WITH MICROORGANISMS. Keep covered when not in use. Protect from freezing.

Packaging: 1 gallon or 5 gallon pail

Coverage: 80-100 sw. ft./gallon @ 10 wet mls. Depending on substrate.

Hazards: Avoid inhaling concentrated vapors. Keep material from eyes. Do not Ingest.

Freight Classification: Non-hazardous. ADHESIVES, roofing liquid NMFC# 170060 CLASS 55

Additional information

Weight .-201808--. lbs
Dimensions .-201808--. × .-201808--. × .-201808--. in

Reviews

There are no reviews yet.

Be the first to review “Latex Bonding Adhesive”

Your email address will not be published. Required fields are marked *