Home > Products > Seam Tape

Seam Tape

Seal Trust™ Seam Tape provides a superior butyl seal, effectively bonding various roofing membranes together in critical seam applications across the roofing industry. Its exceptional long-term heat and chemical resistance empower Seal Trust™ EPDM Seam Tapes to maintain flexibility even in the harshest conditions, ensuring enduring performance. Surpassing industry standards for both tack and shear strength, our Seam Tape products deliver superior holding power, resulting in extended life and high durability for your roofing system. You can confidently use this tape with typical roofing membranes, including EPDM and TPO membranes. Furthermore, it facilitates quick installation, eliminating the need for expensive hot air welders. Always use industry-standard roofing membrane cleaners and primers to properly prepare the membrane before application, guaranteeing an optimal bond. We offer it in both black and white options to match your specific membrane color.

Resistant to: Weather, water & water vapor, acidic or basic solutions
Effected by: Petroleum, grease, oil, solvents, vegetable oils, and animal fats Product
Storage: Store in warehouse without excessive heat. Do NOT store long term on roof.
Shelf Life: 1 year if stored between 60° and 80° F.

Color Black or White
Nominal Thickness 30 mils
Adhesive Type Butyl-based
Adhesion To most clean, dry substrates/surfaces
Application Temperature Temperature must maintain 40°F and above for at least 48 hours
Resistant to Weather, water and water vapor, (5%) acidic or basic solutions
Effected by Petroleum, grease, oil, solvents, vegetable oils, and animal fats
Storage Store in warehouse without excessive heat. Do NOT store long term on roof
Shelf Life 1 year if stored between 60°F and 80°F

Application Instructions

Always clean and prime membrane using roofing industry standard products for tape applications such as Seal Trust Tack Back™ Tape Primer, or Low VOC Seam Primer. Allow primer to dry before installing tapes. Overlap membrane based on conditions or specifications. Clean both sides of membrane in the seam. Chalk lines are recommended for aligning tape. Allow release paper to stick out 1/2” from the membrane overlap. Install tape into seam leaving release paper on the tape. roll release paper using metal seam roller with some force perpendicular to the tape product. This helps avoid fish mouths. Start in the middle of the seam and work towards the ends. Fold top membrane piece into the release paper and THEN pull release paper off, use your hand to guide membrane carefully on to tape before final rolling with metal roller

Frequently Asked Questions

Seal Trust Seam Tapes are being used for to bond various roofing membranes together in typical seam applications on low slope roofs.

Yes, our tapes and flashings have been tested and are UV resistant.

Seam Tape
x