Home > Products > Low VOC Neoprene Bonding Adhesive

Low VOC Neoprene Bonding Adhesive

Coverage:
60 Sq. Ft. / Gallon
300 Sq. Ft. / 5 Gallon

Seal Trust™ Low VOC Neoprene Bonding Adhesive powerfully and permanently bonds EPDM and TPO membranes to insulation boards, wood, metal, and masonry. This advanced formula meets strict environmental regulations while adhering exceptionally to diverse substrates. Professionals rely on its rapid curing time and high-strength bond to secure membranes effectively, even in challenging conditions. The adhesive remains flexible, accommodating structural movements without compromising integrity. Apply this versatile adhesive with a brush, roller, or spray to achieve consistent results on projects ranging from small repairs to large-scale installations. This product enhances the longevity and water-tightness of any roofing system. Note that the solvent content dries faster than regular bonding adhesives. Seal Trust formulated this product specifically for use in  OTC states with Low VOC requirements. 

Available in 1 gallon cans or 5 gallon pails

Color Neutral to Translucent Yellow
Size 1 Gallon or 5 Gallon Pail (metal)
Adhesive Type Solvent-based
Use Bonding EPDM membranes to approved substrates
Application Method 2-sided contact method
Adhesion To most clean, dry substrates/surfaces
Approved Substrates ISO, non-asphalt based fiberboard, plywood/OSB, metal, masonry, EPDM
Application Temperature Temperature must maintain 40°F and above for at least 48 hours
Coverage Amount 60 Sq. Ft. per gallon of adhesive coverage
Storage Store in warehouse without excessive heat. Do NOT store long term on roof
Shelf Life 1 year if stored between 60°F and 80°F
Restrictions Not to be used to adhere rubber to rubber

Application Instructions

Read the container label for recommended application instructions for TPO and EPDM projects. Ensure adequate adhesive coverage when applying to substrates with irregular surface patterns. Stir well before use. You may warm the adhesive to room temperature before use to make application easier. Apply a thin coat to both intended surfaces and let the adhesive “dry” until it is tacky to the touch. Mate both surfaces and apply mild pressure. Once you mate the surfaces, you cannot reposition them without breaking the bond. Roll the membrane when you complete the process. CAUTION: Keep bonding adhesive out of the seam areas at all times!

Frequently Asked Questions

Seal Trust Low VOC Neoprene Bonding Adhesive is especially formulated for use in OTC states with Low VOC requirements. It may dry faster than regular bonding adhesives due to the solvent content. Our Low VOC Neoprene Bonding Adhesive is designed for use with TPO & EPDM membranes to adhere to insulation boards such as ISO and wood fiber and also to wood, metal, masonry and approved low slope roofing substrates. It may also be used as a general contact bond adhesive for both vertical and horizontal surfaces.

  • The Seal Trust Neoprene Bonding Adhesive is applied to both the membrane and the substrate. Let it dry to the touch and then bond together.
  • The Seal Trust Latex Bonding Adhesive is applied directly to the substrate and then the membrane is applied over the adhesive and smoothed out with a stiff bristle broom.

Yes, using any of the Seal Trust adhesives using the two-sided method. With this installation method, you apply the adhesive to both the substrate and the membrane, wait for it to dry to the touch and then bond them together.

There are two types of roofing adhesives.

All Seal Trust adhesives are compatible with EPDM Membrane. Not all Seal Trust adhesives are usable on TPO. Please use the contact form if you have additional questions.

  • When applying roofing adhesives, if you do not let them dry to the touch, they will blister and not appear nice and smooth. Depending on the substrate if it is porous the blisters will eventually dissipate. If not porous, the blisters will remain visible and could cause drainage issues for your roof.
  • Not using enough adhesive at a minimum of 60 Sq ft. per gallon for the solvent based adhesive and 100 sqft/gal for the water-based adhesives.

  • Seal Trust Latex Water Based Bonding Adhesive: Use the one sided method directly to the substrate.  If adhering to a vertical surface, then use the contact/two sided method.
  • Seal Trust Splice Adhesive and Seal Trust Neoprene Bonding Adhesive both use the contact/two-sided method. Apply the adhesive to both the substrate and the membrane, wait for it to dry to the touch and then bond together.

Any of these Seal Trust Adhesives will work:

Low VOC Neoprene Bonding Adhesive
x