EPDM & TPO Roofing Products Mfg.-

    Low VOC Tape Primer

    • /
    • Low VOC Tape Primer
    Low VOC tape primer
    Low VOC tape primer

    Low VOC Tape Primer

    $0.00

    Download Product Data Sheet Download Safety Data Sheet

    Available in 1 gallon cans (6/cs)

    Low VOC Tape Primer Product Information:

    Low VOC Tape Primer is a clear product specifically formulated as a primer for single ply membranes before the installation of any and all tape products such as seam, flashing and cover tapes along with pipe boots and patch disks in all OTC states that require low VOC products. It is a clear product when dried allowing for use with white and black membranes.

    Application Instructions:
    Always use Low VOC Splice Wash on older, dirty membranes before the use of this product. Change rags frequently when cleaning dirty membranes. Low VOC Tape Primer should be scrubbed into the membrane using scrub pads such as Scotch Brite pads. Allow to dry to the touch depending on temperature and humidity. Always use solvent resistant gloves when applying this product.

    SKU: https://sealtrustroofing.com/wp-content/uploads/2018/08/tpo-seam-tape.png Category: Tags: , ,

    TPO Low VOC Tape Primer Physical Properties:

    Color: Clear to neutral   Viscosity (eps): #3 @ 20 rpm=50 cps
    Density (#/GAL.): 7.21#
    Solids: 14.2
    Flash Point (F): 3.9F TCC
    Base: Synthetic elastomers, resin(s) and filler(s)
    Solvent System: Esters and Aliphatics
    Clean-up Solvent: Mineral spirits

    Storage: May be stored outside if protected from water. The primer may jell at lower temperatures, but will readily liquefy as temperatures rise. Shake or stir the material lightly before use and every 15 minutes during use.

    Packaging: 1 gallon (6 gal/cs)

    Freight Classification:  UN1133, ADHESIVE, 3 PGII NMFC# 170060 CLASS 60

    Weight-201808-- lbs
    Dimensions-201808-- × -201808-- × -201808-- in

    Related products

    ssc-600-splice-wash-1-gallon-tpo
    $0.00
    Splice Wash

    Download Product Data Sheet Download Safety Data Sheet

    Available in 1 gallon cans or 5 gallon pails

    Splice Wash is a clear solvent used to clean dirt and containments from single ply roof systems. Especially used on old membranes to remove dirt prior to application of tape primers or seam adhesives. Change rags or applicator pads frequently! Do not allow product to puddle on EPDM for long periods of time. Discarded rags should be disposed of properly and will be a flammable hazard. No smoking or open flames on the roof while using this product. Also available in a Low VOC formula for use in OTC states.

    Application Instructions:

    The use of Seal Trust™ Toluene Splice Wash prior to application of this product is recommended. This product should be scrubbed into the EPDM surface thoroughly to remove surface debris. Change applicator pads frequently and cover an area in excess of the area to be seamed. No special applicator is required. When used with clean TPO, this primer is a cleaner and primer and the use of Toluene Splice Wash is not required. Solvent resistant gloves should be used when applying this product.

    Splice Adhesive
    $0.00
    Splice Adhesive

    Download Product Data Sheet Download Safety Data Sheet

    Available in 1 gallon cans

    Seal Trust™ Splice Adhesive is a black adhesive designed for use as a seam adhesive during the installation of EPDM membrane systems where seaming together two sheets are required. It may also be used as a contact adhesive to bond membranes to suitable substrates as a bonding adhesive substitute. It is a viable alternative for bonding both EPDM and TPO in vertical and horizontal situations.

    Application Instructions:

    This adhesive must be thoroughly mixed prior to and during use. Recommended application instructions are printed on the container label. Meticulous care must be exercised prior to use of this product in the preparation of the seams to be lapped or spliced. The use of Seal Trust™ Splice Wash is highly recommended along with the use of Seal Trust™ Tape Primer to properly prep the seams prior to splice. Use Seal Trust™ Lap Caulk after the seams have been spliced to protect the seams until total cure has been achieved.

    seal-trust-quickseal-black-white-fabric-tapes-sealcorp-usa
    $0.00
    QuickSeal Tapes

    Download Product Data Sheet Download Safety Data Sheet Installation

    QuickSeal Tapes

    QuickSeal tapes from Seal Trust™ are pressure sensitive adhesive tapes, which remain flexible even in cold temperatures. QuickSeal tapes may be used on metal roofs to strip in side laps, end laps, and other penetrations prior to the application of a coating system (with the use of QuickSeal Fabric Tape). QuickSeal tapes may also be used on EPDM, TPO, CSPE/Hypalon, CPE, SBS, APP modified, asphalt BURs, all metal roofs, tiles, aluminum, galvanized steel, gypsum board, wood, polyethylene, propylene, polystyrene, fiberglass, brick, concrete, masonry and OSB. This product may be used to repair gutters, chimney flashings, and metal roofs on mobile homes and transport vehicles. QuickSeal tapes make a watertight seal. Can be installed in temperatures down to 20°F (with EPDM Tape Primer). Available in black, white, and fabric. The fabric facer is designed to be coated to match the surrounding roofing surface. The white TPO facer makes QuickSeal tapes UV resistant.

    Storage: Store in warehouse without excessive heat. Do NOT store long term on roof.
    Shelf Life: 5 years if stored between 60° and 80° F.

    tpo-low-voc-tape-primer-tpo-epdm
    $0.00
    Low VOC Tape Primer

    Download Product Data Sheet Download Safety Data Sheet

    Available in 1 gallon cans (6/cs)

    Low VOC Tape Primer Product Information:

    Low VOC Tape Primer is a clear product specifically formulated as a primer for single ply membranes before the installation of any and all tape products such as seam, flashing and cover tapes along with pipe boots and patch disks in all OTC states that require low VOC products. It is a clear product when dried allowing for use with white and black membranes.

    Application Instructions:
    Always use Low VOC Splice Wash on older, dirty membranes before the use of this product. Change rags frequently when cleaning dirty membranes. Low VOC Tape Primer should be scrubbed into the membrane using scrub pads such as Scotch Brite pads. Allow to dry to the touch depending on temperature and humidity. Always use solvent resistant gloves when applying this product.

    seal-trust-flashing-tapes
    $0.00
    Flashing Tapes

    Download Product Data Sheet Download Safety Data Sheet

    Product Information:

    Seal Trust™ Flashing Tapes are uncured EPDM rubber with specially formulated butyl mastic used in applications on roofs where pipes, stacks, vents, or corners require flexible flashing products to ensure no water infiltration into the roofing system. Flashing Tape allows molding or slight stretching of the material then slowly cures to form. With superior tack and peel strengths, our butyl mastic remains flexible in harsh conditions and gives a permanent water tight seal. Industry standard roofing membrane cleaners and primers must be used to clean the surfaces before application.

    Application Instructions:

    Always clean and prime membrane using roofing industry standard products for tape applications such as Seal Trust Tack Back™ Primer or Low VOC Tape Primer. Allow primer to dry before installing tapes. Field flashing corners, stacks, vents, or other roofing installation procedures where material must be formed. Do not over stretch. Not for use in horizontal seam repairs. Application by experienced roofing professionals recommended.

    seal-trust-water-cut-off
    $0.00
    Water Cut-Off

    Download Product Data Sheet Download Safety Data Sheet

    Available in 10.5 oz. fiber caulk tubes or 5 gallon pails.

    Seal Trust™ Water Cut-Off Mastic is a gray solvent based caulk designed to be used under the membrane to prevent water infiltration. Meets OTC VOC requirements.

    Physical Properties:

    Color: Gray
    Viscosity (eps): 40# .104= 15-20 sec./20 gms.
    Sievers Rheometer Density (#/GAL.): 11.0#
    Solids: 86
    Flash Point (F): 14 F TCC
    Base: Synthetic elastomers, resin(s) and filler(s)
    Solvent System: Aliphatic Clean-up
    Solvent: Mineral spirits, VMP naptha, kerosene
    Storage: May be stored outside if protected from water.
    Packaging: 5 gallon pails, 10.5 oz. fiber caulk tubes (10 or 25 tubes/ctn)