Copyright All Rights Reserved © 2022 | Privacy policy | Sitemap

epdm primer

$0.00

Download Product Data Sheet Download Safety Data Sheet

Available in 1 gallon round paint cans (4 gal/cs)

F-Primer Tape Primer is designed for use with EPDM and TPO roofing installations to enhance the performance and bond of EPDM seam tape and TPO seam tape. This black tape primer requires initial stirring at the start of each day and periodically throughout the day. It is influenced by both temperature and humidity. Strong initial tack allows for immediate bond of tapes to membranes. This product is not intended for use in OTC states.

Application Instructions:

F-Primer should be stirred thoroughly prior to use and then scrubbed into the EPDM surface thoroughly using scrub pads such as Scotch-Brite pads. Change applicator pads frequently and cover an area in excess of the area to be seamed. The use of Seal Trust™ Splice Wash prior to application of this product is recommended on dirty, old membranes to remove all surface contaminations and enhance the performance and bond of EPDM seam adhesives and primers. When used with clean TPO, this primer is a cleaner and primer and the use of Toluene Splice Wash is not required. This product dries black use caution when using with white or colored membranes. Clean up with mineral spirits.

$0.00

Download Product Data Sheet Download Safety Data Sheet

Available in 1 gallon cans (6/cs)

Low VOC Tape Primer Product Information:

Low VOC Tape Primer is a clear product specifically formulated as a primer for single ply membranes before the installation of any and all tape products such as seam, flashing and cover tapes along with pipe boots and patch disks in all OTC states that require low VOC products. It is a clear product when dried allowing for use with white and black membranes.

Application Instructions:
Always use Low VOC Splice Wash on older, dirty membranes before the use of this product. Change rags frequently when cleaning dirty membranes. Low VOC Tape Primer should be scrubbed into the membrane using scrub pads such as Scotch Brite pads. Allow to dry to the touch depending on temperature and humidity. Always use solvent resistant gloves when applying this product.