Flashing Tapes

$0.00


Product Information:

Seal Trust™ Flashing Tapes are uncured EPDM rubber with specially formulated butyl mastic used in applications on roofs where pipes, stacks, vents, or corners require flexible flashing products to ensure no water infiltration into the roofing system. Flashing Tape allows molding or slight stretching of the material then slowly cures to form. With superior tack and peel strengths, our butyl mastic remains flexible in harsh conditions and gives a permanent water tight seal. Industry standard roofing membrane cleaners and primers must be used to clean the surfaces before application.

Application Instructions:

Always clean and prime membrane using roofing industry standard products for tape applications such as Seal Trust™ F-Primer or Low VOC Tape Primer. Allow primer to dry before installing tapes. Field flashing corners, stacks, vents, or other roofing installation procedures where material must be formed. Do not over stretch. Not for use in horizontal seam repairs. Application by experienced roofing professionals recommended.

SKU: https://sealtrustroofing.com/wp-content/uploads/2018/08/tpo-seam-tape.png Category:

Description

Resistant to: Weather, water & water vapor, (5%) acidic or basic solutions
Effected by: Petroleum, grease, oil, solvents, vegetable oils, and animal fats
Product Storage: Store in warehouse without excessive heat. Do NOT store long term on roof.
Shelf Life: 1 year if stored between 60° and 80° F.

Flashing Tapes Physical Properties:

Color: Black Solids: 100%
Odor: Slight Hydrocarbon
Penetration: (ASTM D 217) : 100/130 mm
Volatile: % by Volume: None
Adhesion: To most clean, dry substrates/surfaces

Additional information

Weight .-201808--. lbs
Dimensions .-201808--. × .-201808--. × .-201808--. in

Reviews

There are no reviews yet.

Be the first to review “Flashing Tapes”

Your email address will not be published. Required fields are marked *