Copyright All Rights Reserved © 2022 | Privacy policy | Sitemap

EPDM Rubber and TPO Roofing Accessories You Can Trust!

We do not have to be on your newly installed EPDM or TPO roof, however we do want to be on your roof for the next 30 years. Our Seal Trust brand EPDM and TPO repair and maintenance accessories are a “Seal You Can Trust.”

The Seal for Quality and Trust

Do you have a sales-related question? Contact our sales team for assistance.

Seal Trust is Your Trusted Brand

Contractor-Approved Quality

Seal Trust brand products are trusted by over-the-counter contractors for non-warranty jobs all across the country. Perfect for the on-the-go contractor.

Competitive Pricing

We pride ourselves on being priced competitively in the market to bring you top-tier quality products at affordable prices.

Fast Shipping

Need your products fast?  Our manufacturing process allows quick turn around times on most products with quick shipping.

Our Products

$0.00

Download Product Data Sheet Download Safety Data Sheet

QuickSeal Tapes

QuickSeal tapes from Seal Trust™ are pressure sensitive adhesive tapes, which remain flexible even in cold temperatures. QuickSeal tapes may be used on metal roofs to strip in side laps, end laps, and other penetrations prior to the application of a coating system (with the use of QuickSeal Fabric Tape). QuickSeal tapes may also be used on EPDM, TPO, CSPE/Hypalon, CPE, SBS, APP modified, asphalt BURs, all metal roofs, tiles, aluminum, galvanized steel, gypsum board, wood, polyethylene, propylene, polystyrene, fiberglass, brick, concrete, masonry and OSB. This product may be used to repair gutters, chimney flashings, and metal roofs on mobile homes and transport vehicles. QuickSeal tapes make a watertight seal. Can be installed in temperatures down to 20°F (with EPDM Tape Primer). Available in black, white, and fabric. The fabric facer is designed to be coated to match the surrounding roofing surface. The white TPO facer makes QuickSeal tapes UV resistant.

Storage: Store in warehouse without excessive heat. Do NOT store long term on roof.
Shelf Life: 5 years if stored between 60° and 80° F.

$0.00

Download Product Data Sheet Download Safety Data Sheet

QuickSeal Tapes

QuickSeal tapes from Seal Trust™ are pressure sensitive adhesive tapes, which remain flexible even in cold temperatures. QuickSeal tapes may be used on metal roofs to strip in side laps, end laps, and other penetrations prior to the application of a coating system (with the use of QuickSeal Fabric Tape). QuickSeal tapes may also be used on EPDM, TPO, CSPE/Hypalon, CPE, SBS, APP modified, asphalt BURs, all metal roofs, tiles, aluminum, galvanized steel, gypsum board, wood, polyethylene, propylene, polystyrene, fiberglass, brick, concrete, masonry and OSB. This product may be used to repair gutters, chimney flashings, and metal roofs on mobile homes and transport vehicles. QuickSeal tapes make a watertight seal. Can be installed in temperatures down to 20°F (with EPDM Tape Primer). Available in black, white, and fabric. The fabric facer is designed to be coated to match the surrounding roofing surface. The white TPO facer makes QuickSeal tapes UV resistant.

Storage: Store in warehouse without excessive heat. Do NOT store long term on roof.
Shelf Life: 5 years if stored between 60° and 80° F.

$0.00

Download Product Data Sheet Download Safety Data Sheet

Perimeter Strip  Information

Seal Trust™ Perimeter Strip is a 6” wide .045 reinforced EPDM membrane to be installed under the rubber at the perimeter of roofs or at angle changes greater than 4” in height. Perimeter Strip comes with 3” butyl mastic sealer for installation to EPDM membrane using Tape Primer. Installation around the perimeter using 2”or 3” steel plates attached to the roof deck prior to installation of the membrane. Clean the back of the sheet at the area of contact with the butyl mastic. Carefully pull release paper off the mastic and press into place. Then roll membrane into mastic using steel roller for optimum results.

Application Instructions:

Perimeter Strip comes with 3” butyl mastic sealer for installation to EPDM membrane using Tape Primer. Install around the perimeter using 2” or 3” steel plates attached to the roof deck prior to installation of the membrane with proper fasteners spaced per recommended wind uplift area. Clean the back of the sheet at the area of contact with the butyl mastic. Carefully pull release paper off the mastic and press into place. Then roll membrane into mastic using steel roller for optimum results.

$0.00

Download Product Data Sheet Download Safety Data Sheet

Available in 10.5 oz. fiber caulk tubes or 5 gallon pails.

Seal Trust™ Water Cut-Off Mastic is a gray solvent based caulk designed to be used under the membrane to prevent water infiltration. Meets OTC VOC requirements.

Physical Properties:

Color: Gray
Viscosity (eps): 40# .104= 15-20 sec./20 gms.
Sievers Rheometer Density (#/GAL.): 11.0#
{caa914c204b1119fb3ddf612b08b76802b03c1f9b8e71b690c389a73edd07169} Solids: 86
Flash Point (F): 14 F TCC
Base: Synthetic elastomers, resin(s) and filler(s)
Solvent System: Aliphatic Clean-up
Solvent: Mineral spirits, VMP naptha, kerosene
Storage: May be stored outside if protected from water.
Packaging: 5 gallon pails, 10.5 oz. fiber caulk tubes (10 or 25 tubes/ctn)

$0.00

Download Product Data Sheet Download Safety Data Sheet

White Seam Tapes

Seal Trust™ TPO Seam Tapes are a butyl sealer used for bonding various roofing membranes together in typical seam applications in the roofing industry. Long term heat and chemical resistance gives Seal Trust™ Seam Tape the ability to remain flexible in harsh conditions. Surpassing the industry standards for tack and shear strength our Seam Tape products provide superior holding power for long life and high durability. Used with typical roofing membranes such as EPDM, and TPO and some PVC membranes, Seam Tape allows for quick installation without expensive hot air welders. Industry standard roofing membrane cleaners and primers must be used to clean the membrane before application. Available in black or white.

Resistant to: Weather, water & water vapor, (5{caa914c204b1119fb3ddf612b08b76802b03c1f9b8e71b690c389a73edd07169}) acidic or basic solutions
Effected by: Petroleum, grease, oil, solvents, vegetable oils, and animal fats Product
Storage: Store in warehouse without excessive heat. Do NOT store long term on roof.
Shelf Life: 1 year if stored between 60° and 80° F.

$0.00

Download Product Data Sheet Download Safety Data Sheet

White in color and pipe sizes ranging from 1-3″ or 1-6″

Product Information

Seal Trust™ TPO Pipe Boot is a pre-molded roofing accessory for flashing pipes or stacks protruding from the roof on single ply membrane installations such as EPDM and TPO. Pipe Boots are installed over vent stacks and pipes usually on flat roof surfaces. The boots all come pre-taped for easy installation with a flange that installs to the membrane in a peel and stick application. The boots come with two piece release paper for easy use.

Application Instructions:

Always clean and prime membrane using roofing industry standard products for tape applications such as Seal Trust™ F-Primer or Low VOC Tape Primer. Usual installation requires primer installed on or about 4-5 inches away from each pipe. Then measure the diameter of the pipe and cut the boot at one size smaller than the pipe (i.e. 4” stack cut at 3” level) and stretching over the pipe. Before pipe boot installation Water Cut Off Caulk should be installed on the pipe for maximum protection. Pipe clamp is provided and required for final step.

$0.00

Download Product Data Sheet Download Safety Data Sheet

White Patch Disks

Product Information:

Seal Trust™ TPO Patch Disks are uncured roofing membrane available in black or white with butyl mastic sealer die cut into 8” round disks. Can be used for flashing corners, as repair patches, or t-patches and anywhere required on EPDM, most TPO and some PVC membranes. Membrane must be cleaned prior to installation using Tape Primer.

Application Instructions:

TPO Patch Disks are a multi use product used in inside/outside corners, t-joint covers, and patching or repairs of both EPDM and TPO membranes. Always clean and prime membrane using roofing industry standard products for tape applications such as Seal Trust™ F-Primer or Low VOC Tape Primer. Lap Caulk should be used around all the outer edges of the disk for proper application. Use 3” steel roller for final installation step. Be careful to avoid fish mouths or air bubbles.

$0.00

Download Product Data Sheet Download Safety Data Sheet

White Lap Caulk
Available in 10.5 oz. tubes

Product Information:

Our TPO lap caulk is available in 10.5 oz tubes in both black or white for use in single ply membrane applications such as EPDM or TPO. Standard caulk gun is required for application. Product should not be screed or smoothed after application. This caulk is meant to prevent water infiltration into seams and overlaps prior to the adhesive setting up. Usually 24-48 hours depending on temperature and humidity.

Application Instructions:

TPO lap caulk is used when applying splice and/ or bonding adhesives where membrane is overlapped. Prevents initial moisture infiltration before the adhesives are set. Standard caulk gun required for use. Once plastic top is cut you must puncture the tube through the plastic top with a screw driver or long screw or nail to begin application. Do not screed or smooth caulk once applied. All seams that were glued or installed should be caulked at the end of each day.

Enjoy incredible cost savings!

Quality products at incredible prices.